Biomass fuel particles have high purity and no other dirt that does not cause heat energy. Its carbon content is 75-85, its ash content is 3-6, and its moisture content is 1-3. There are no gangue bricks, stones, etc. that do not generate heat but consume heat The residue will control costs for the company. Biomass pellets are processed at room temperature by using the pressure wheel of the
Biomass Pellet Machine and the ring die to process the crushed biomass fuel straw, forestry and fruit industry waste and other raw materials in a hot state and high density.
The relative density of raw materials is generally 0.1-0.13t/m3, and the relative density of particulate matter is 1.1.1.3t/m3, which is convenient for storage and transportation, and greatly improves the ignition characteristics of biomass fuel.
As a new type of granular fuel, coal-fired boiler fuel has been widely recognized for its advantages; compared with traditional fuels, it not only has financial advantages but also has environmental protection and economic benefits, which meets the requirements of green development.
How to save fuel pellets machined from biomass pellets?
1. To ensure the dryness of biomass particles, such raw materials are generally transported directly from the field to the production line at the same time, especially the raw materials of straw, before they are officially processed into pellet fuel, everyone should dry the straw.
2. Ensure waterproof work. There may be more rain and temperature in winter, especially after snowfall, when the snow melts, the temperature drops, and the environment becomes humid and cold, so the waterproof work must be done well.
3. Pay attention to the change of water content. The water content in the biomass pellets does not have to be too much. Cold and hot can easily cause qualitative changes, so we should store them in air-dry conditions.