How to do the daily maintenance of the corn stalk pellet machine

The corn stalk pellet machine, as the name suggests, is a device that converts corn stalks into biomass pellets. With the improvement of technology, the raw material of pellet machine is no longer simply corn stalks, and many users have also added wheat stalks, rice husks, peanut seedlings and sawdust. The comprehensive raw materials are also not a small challenge to the pellet machine equipment. How to do the daily maintenance of the corn pellet machine, the following is the answer for you.

1. Before starting the machine, be sure to check whether there are other foreign objects in the hopper. Do not put your hand into the hopper or use other tools to remove materials during normal startup to avoid danger. If you need to know the discharge situation, you can observe it through the equipment observation port.

2. The raw materials to be used should be inspected, and the hard (metal) debris should be removed from the processed materials to avoid damage to the machine and cause accidents.

3. Always check the wear of the grinding wheel, and adjust, replace or repair if necessary.

4. When checking the pellet machine, the power supply must be cut off to ensure safety.

5. During the production process, if there is abnormal noise in the hopper of the machine, it should be shut down for inspection in time, and the machine can be turned on after cleaning the foreign objects.

6. The motor must be installed with a ground wire to avoid accidents.