Laboratory swing pellet machine parts lubrication method sharing

The laboratory swing granulator is mainly used for manufacturing various specifications of granules in the pharmaceutical, chemical, food and other industries. After drying, it can be used to press various shaped products. The machine can also be used to pulverize dry materials that are condensed into a block.

The structure of the hopper and granulation device is designed according to the principle of installation, cleaning and convenient use. The structural materials in contact with the materials are all made of stainless steel and non-toxic PTFE. The vacuum feeder ensures the cleanliness of the product. chemical reaction.

The mechanical lubrication of the laboratory swing pellet machine is as follows:

1. The box of the small particle machine is equipped with an oil meter. It should be refueled once before driving. It can be added in the middle according to the temperature rise and operation of each bearing.

2. The worm gear box must store the oil for a long time. The height of the oil surface is all invaded into the oil. If it is used frequently, it must be replaced with new oil every three months. There is oil plug at the bottom of the sputum.

3. When the small particle machine is refueling, do not let the oil overflow the cup, and do not flow to the surroundings of the machine and the ground. Because oil is easy to contaminate materials, affecting product quality.

Because part of the work of the laboratory rocking machine vibrating screen is a fine operation, it can not avoid such problems during operation. Sometimes, when the material is screened, the discharge condition is different. At this time, it can be adjusted by adjusting the upper and lower weights. Material screening to achieve better results.

First of all, we can adjust the additional weight of the vibration machine of the laboratory swinging pellet machine, and install additional weights on one side of the upper and lower weights (upper and lower eccentric blocks), which can increase the exciting force of the vibrating screen and filter the materials according to the customer. The specific gravity is different from the number of selected vibrating screen layers, and the excitation force is appropriately increased and decreased, and the number of additional weights is adjusted. Secondly, the phase angle of the upper and lower weights of the vibrating motor can be changed, thus changing the residence time and trajectory of the material on the vibrating screen.

Furthermore, the bottom cylinder of the laboratory swinging granulator vibrating screen can be opened, and the fixing bolt of the lower weight can be loosened, and the upper and lower weights are adjusted to the opposite direction of the vibrating screen discharge port according to the movement trajectory of the material sieved by the vibrating screen. Phase angle. Then, the material is placed on the vibrating screen and the vibrating screen is energized to see the movement track of the material on the screen surface. If the material separation efficiency, permeable rate, and treatment amount, the distribution of the material on the screen surface is relatively uniform, and the fixing bolt can be tightened and then tightened.