The maintenance of wood pellet machine is very important

At present, wood pellet machines are widely used, but there will be some problems when using them, so the maintenance of wood pellet machines is very important. In order to let everyone use the pellet machine equipment better, the following Shandong Jingerui pellet machine manufacturer will introduce you to the 5 major maintenance common sense of the Wood Pellet Machine:

1. Regularly check the parts, once a month, check whether the worm gear, worm, bolts on the lubricating block, bearings and other moving parts are flexible and worn. If defects are found, they should be repaired in time, and must not be used forcibly.

2. The pellet machine should be used in a dry and clean room, and should not be used in places where the air contains acid and other corrosive gases.

3. If the pellet machine is shut down for a long time, the whole body of the machine must be wiped clean, and the smooth surface of the machine parts should be coated with anti-rust oil and covered with a cloth.

4. When the machine is in use or stopped, the drum should be taken out for cleaning, brushed off the remaining powder in the barrel, and then installed correctly to prepare for the next use.

5. Since the wood pellet machine contains rubber parts and other non-steel objects, if it is stained with oil or damp, cracks or bursts will occur if it is not treated in time. To avoid this phenomenon, other non-steel parts such as conveyor belts should be removed and covered with plastic wrap and placed in a dry place. Objects that cannot be removed should be jacked up and kept at a certain distance from the ground.

When we use the pellet machine, we must maintain it. Reasonable maintenance can effectively prolong the service life of the sawdust pellet machine and ensure the normal operation of the equipment in the next production.