Do you know the reason why the straw pellet machine cannot press pellets?

Many customers who are making pellets for the first time will always have similar problems when the equipment is pulled back to prepare for production. For example, the straw pellet machine cannot press pellets!

This is as anxious and angry as a worker can't work. Many purchasing prime ministers think about equipment problems. This is our usual way of thinking. If there is a problem, you can push it.

So without further ado, let's analyze the reasons why the straw pellet machine does not produce material.
1. The raw material moisture is not suitable. Too much water or too little water can't make the pellets form, because our straw pellet machine is made by physical pressing without any addition of chemical components, and the adhesiveness is formed by the combination of appropriate water and pressure, so the raw material Moisture is one of the important factors.

2. The compression ratio of the mold is not correct. Compression ratio and moisture are both equally important factors. One is controlled by the raw material and the other is controlled by the grinding disc. Both ratios are indispensable. This compression ratio must be communicated with the manufacturer. Special attention is: For example, some time ago, the compression ratio Particles, suddenly found that the raw materials are not enough, and added other raw materials, which will seriously affect the production! Because the compression ratio of different kinds of raw materials is different, if you have a variety of raw materials, you should communicate with the manufacturer to prepare a few more abrasives.
3. The gap between the ring die of the pressing roller is not adjusted properly. In the case of equipment testing, our company's technical staff will hand over to the customer for use and debugging, so as to avoid the situation of no material.

But it depends on what your actual situation is, and the right medicine can be better and faster.