Solid wood cracking is a quality problem? How to solve the problem of solid wood cracking?

Cracking wood is a quality problem? How to solve the problem of wood cracking? There is a saying in the industry that "it does not crack, do not call wood", which reflects the deformation of the furniture, cracking is a common thing, so the solid wood furniture itself exists Self-destructive probability. The following small series to explain in detail, we take a look!

First, cracking wood is a quality problem?

Cracking of solid wood is a quality problem . In fact, it is not necessarily. In addition to the quality cracking of solid wood furniture, there are two main reasons:

1, if you live in a courtyard or cottage, the general cracking of solid wood furniture is due to buildings, floor heating, heating and other reasons, so that changes in temperature and humidity, resulting in cracking is also very common, because the furniture is very sensitive to temperature and humidity.

2. The false wood is also prone to wood cracking quality problems. Generally, the false wood moisture content is 12%. If the air is too sensitive, it will increase the moisture content of the wood. Sometimes the moisture will be too humid, causing the temperature and humidity to fluctuate drastically. It will crack over time.

Second, how to solve the problem of cracking wood

1, the panel: If the panel is longer and wider, or even wider, so that the greater the pre-stress, more difficult to crack. However, with the modern furniture more and more concerned about fashion, beautiful, many are single-sided, so it is easy to increase the problem of cracking. Therefore, the workmanship must also be particularly meticulous. For example, if the panel is connected with the wooden frame below, it needs to leave an appropriate amount of space within 1.8m, which can reduce the cracking rate.

2, the framework: This is generally used to support the furniture, can be manufactured using thin panels, if the choice of thick frame is made of solid wood. What happens to the frame is the problem of dislocation. This is because the plate does not leave any room for expansion of the core plate. After the expansion, it will destroy the structure and cause deformation and cracking. Therefore, there is enough space for the core plate to expand.

3, the door: to choose the best five-in-one mounting plate to the structure, that is, the door, large drawer panel to use five pieces of wood combined, so that the possibility of deformation will be reduced to low.

4. Drawer: The drawer should have good structure. If it is not good, there will be two situations: one is that the inlay panel cannot pull open the drawer after damp; the second is that the gap after heating is too big in winter, so how to avoid it? The top surface of the drawer panel with a 5 degree bevel.

Xiao Bian summary: solid wood cracking is a quality problem? How to solve the problem of solid wood cracking? In fact, the best way to avoid cracking, that is, buying solid wood furniture, solid wood, and see if its structure is stable and reasonable. So, the above content hopes to provide help to everyone!