Solid wood door cover how much money one meter solid wood door cover installation steps are what

Door covers are more common in daily life, there are many functions of door covers, and door covers can also be used as decorations in our home. Today, solid wood door covers are a type of door covers that are more popular with everyone. How much is a real wooden door cover a meter? What are the steps for installing solid wood door covers? If you have this need, you may wish to follow me to learn about it!

How much is a solid wood door cover a meter?

There are many factors that affect the price, and some are calculated according to the thickness of the door. The thickness does not exceed how much it is a price, how much the thickness is between what is a price, and the thickest is a price. The average solid wood door line is about 200 yuan/meter. The market is not the same and prices may fluctuate.

1. Solid wood free paint single side 60 yuan / meter, double sided 80 yuan / meter;

2. One side of solid wood paint 100 yuan / meter, double sided 120 yuan / meter;

3. According to the different choice of wood, the price must be 300 yuan/meter.

Note: This price is for reference only! Due to geographical differences, of course, the price will be different. For more details on the prices, please refer to the local distributors!

What are the steps for installing solid wood door covers?

1, according to the design drawings to check the specifications of the door, open the direction, and related accessories. Use a tape measure to measure the height and width of the door opening. The standard height and width of the door: 200cm × 80cm; height and width of the bathroom door: 200cm × 70cm. If the size is different, correct it in time.

2. Measure the position line to determine the position of the door frame. Use the ink fountain to pull out the vertical line. There are two vertical lines on the side of the door. Drill the eye with a percussion drill in the vertical line. The distance between the eyelet and the eyelet is approximately 30 cm. The side door has two rows of ten holes in total. The impact drill bit should be 12 mm and the depth of the drilled hole should be about 6 cm.

3. The small wooden wedges are nailed into the holes one by one with a hammer to fix the door frame plate. The size of the small wooden wedge is: 5cm x 1.5cm x 1.5cm. It is better to use larch. Because the larch's wooden structure is tight, it is not easy to loosen.

4, open the production of door frames. The size of the wood board on both sides of the door frame keel is: 200cm × 3cm × 8cm; the size of the woodboard on the door frame top keel: 80cm × 3cm × 8cm. A high-density nine-point plate was glued on the keel and fixed with steam. The three door frames that were made were joined in the shape of the door and secured with large nails at the joints.

5. Plane the surface of the assembled door frame with a plane. Trimming corners with clear edges and corners. Put the door frame on the door hole, according to the horizontal line of the wall; take the wood or brick under the door frame to adjust the height of the door frame; set aside 5 cm under the keel in the floor.

6, nail a nail in the door frame, the line hanging up, through the vertical line to adjust the vertical frame, while measuring the side of the door frame fixed with a twist nail on the door. Make the door line. The door face can be purchased off-the-shelf, or it can be done by the construction staff according to the drawings. After the production is completed, the door is fixed to the door frame so that the door cover is basically completed.

6. Put the door on the door cover and make a good gesture. Determine the specific position of the hinge on the door cover. Then press the thickness of the hinge to cut the exit path. The diameter of the lock sleeve is also cut out, the door is mounted on the door sleeve, and the hinge is tightened with a thread cutter. Note: The gap between door and door pocket is <1.5mm, which is based on the smooth opening and closing of the door. Remove attachments and dirt from the surface of the door pocket, then apply putty. Before applying the putty, affix a memento paper between the door and the wall to prevent it from sticking to the wall when the paint is applied. When applying putty must be uniform, repair the door to nail holes. The paint spray effect will be more delicate, and the details can be brushed. Install the lock on the keyhole, taking care not to damage the paint.

Edit summary: The above is about the introduction of solid wood door covers, and now the color of the solid wood door covers in the market, more styles, consumers should match with the overall decoration style. After the installation of solid wood door covers, we can effectively help us prevent wind and dust!

Solid wood door cover