Speeding high efficiency pellet making machine operation instructions

High efficiency pelletizer Operating instructions

Process flow: preparation of materials "made pellets" made of pills" drying

1. Before starting the machine, remove the upper cover (as shown in the figure), wash the roller and the contact with the drug with medical alcohol to remove oil and disinfect.

2, the drug was crushed into fine powder after drying cooked, over 80 to 200 mesh sieve. The pulverizing equipment matched with the pelletizing machine, the water-flow pulverizer of the factory or the 100-1000 g rocking pulverizer.

3 , according to the nature of the prescription Chinese medicine powder, refined to a suitable degree of adhesive. (see reference)

4 , the pellets are also called medicines, the powder and the binder are mixed into the feeding port of the machine, the discharge port is replaced with the medicine discharge port, repeated several times, the medicine is good and does not stick to the hand. It is consistent with soft and hard.

5 , pelleting: replace the discharge port corresponding to the roller, put a good strip of medicine into the group to be made into a pellet, and make a pill of uniform size.

8. Drying: dry with a hair dryer or dry in a ventilated place

9 , water pill reference: a) first mix the sweet potato powder (15%-20%) with a small amount of water together

b) cook a pot of water (the ratio of water to pills is 1:1)

c) Mixing the previously prepared a and b to achieve a transparent shape, which can be processed into water pill

10. After use, remove the discharge port, exit the screw, clean the inside of the machine and the roller, and install it back. (as the picture shows)

11. Keep the inside of the equipment clean and dry.